Morningstar's advanced SunLight solar lighting controller combines the SunSaver design with a microprocessor for automatic lighting control functions. A rotary digital switch is used to select from 10 different lighting modes such as dawn to dusk, 2, 4, 6, 8, 10 hours of operation after sunset, few hours on after sunset, off for most of the night, then a few hours on before sunset. An extremely flexible and reliable controller which regulates solar charging as ...
Morningstar's advanced SunLight solar lighting controller combines the SunSaver design with a microprocessor for automatic lighting control functions.
A rotary digital switch is used to select from 10 different lighting modes such as dawn to dusk, 2, 4, 6, 8, 10 hours of operation after sunset, few hours on after sunset, off for most of the night, then a few hours on before sunset.
An extremely flexible and reliable controller which regulates solar charging as ...
The SunSaver Duo two-battery controller for RVs, caravans, boats and cottages is rated for 25 amps at 12 volts DC. This product will charge two separate and isolated batteries at the same time, such as a house and an engine battery, based on user selectable priorities. The SunSaver Duo employs Morningstar's legendary SunSaver controller technology, whose long-term track record for high reliability and improved battery charging is well recognized in the solar industry. This ...
The SunSaver Duo two-battery controller for RVs, caravans, boats and cottages is rated for 25 amps at 12 volts DC.
This product will charge two separate and isolated batteries at the same time, such as a house and an engine battery, based on user selectable priorities.
The SunSaver Duo employs Morningstar's legendary SunSaver controller technology, whose long-term track record for high reliability and improved battery charging is well recognized in the solar industry.
This ...
The SunSaver MPPT is an advanced maximum power point tracking (MPPT) battery charge controller for off-grid PV systems. It enables the use of high voltage, and thin film module arrays up to 400 watts provide a means to use up to a 36V array to charge a 24V or 12V battery. The SS_MPPT controller features a smart tracking algorithm that maximizes the energy harvest from the PV and provides load control to prevent over-discharge of the battery. 15 amps at 12/24 volts May be used for
The SS_MPPT controller features a smart tracking algorithm that maximizes the energy harvest from the PV and provides load control to prevent over-discharge of the battery.
These small controllers are field proven, reliable and economical. The circuits are encapsulated in epoxy for protection from the elements and are simple to use. LVD versions feature a non-adjustable low voltage disconnect. UL listed for installation in hazardous locations. LED status indicator.
LVD versions feature a non-adjustable low voltage disconnect. UL listed for installation in hazardous locations. LED status indicator.
Field proven reliability in this economical, fully featured, epoxy encapsulated controller. Controls up to 10A, with non-adjustable low voltage disconnect. UL listed for installation in hazardous locations. Five-year warranty.
UL listed for installation in hazardous locations. Five-year warranty.
Field proven reliability in this economical, fully featured, epoxy encapsulated controller. Controls up to 20A, with non-adjustable low voltage disconnect UL listed for installation in hazardous locations. Five-year warranty.
Field proven reliability in this economical, fully featured, epoxy encapsulated controller. Controls up to 6A and has a five-year warranty. UL listed for installation in hazardous locations.
Controls up to 6A and has a five-year warranty. UL listed for installation in hazardous locations.
Field proven reliability in this economical, fully featured, epoxy encapsulated controller. Controls up to 6A, with non-adjustable low voltage disconnect. UL listed for installation in hazardous locations. Five-year warranty.
Controls up to 6A, with non-adjustable low voltage disconnect. UL listed for installation in hazardous locations. Five-year warranty.
The T80 TurboChargerTM integrates Maximum Power Point Tracking, battery charge management, state of charge information and communications into a single device. With 80 Amps continuous output, it has the largest capacity in the industry by over 30%. The T80 includes a built-in Energy Monitor using TriMetricTM Technology from Bogart Engineering. It tracks power production and consumption to calculate the energy remaining in the battery. State of Charge (SOC) is displayed in Percent ...
With 80 Amps continuous output, it has the largest capacity in the industry by over 30%.
The T80 includes a built-in Energy Monitor using TriMetricTM Technology from Bogart Engineering. It tracks power production and consumption to calculate the energy remaining in the battery. State of Charge (SOC) is displayed in Percent ...
The Wireless Network Option Card installed in the T80 Option Card slot comes with a chassis mount antenna.
Displays comprehensive status of PV array, and Battery system Battery State of Charge: % Full, Bar Graph and Amp-Hours PV current and voltage Battery charge/discharge Amps 90 days of system history Wireless version: 100 foot range in buildings 300 feet outside (line of sight) Repeater available FCC approved Includes rechargeable batteries
Battery State of Charge: % Full, Bar Graph and Amp-Hours PV current and voltage Battery charge/discharge Amps 90 days of system history
Wireless version: 100 foot range in buildings 300 feet outside (line of sight) Repeater available FCC approved
Includes rechargeable batteries
Displays comprehensive status of PV array, and Battery system Battery State of Charge: % Full, Bar Graph and Amp-Hours PV current and voltage Battery charge/discharge Amps 90 days of system history Wired version: CAT5 cable sends data and power from the T80 Desktop or wall mount Transflective LCD with backlight
Wired version: CAT5 cable sends data and power from the T80 Desktop or wall mount Transflective LCD with backlight
Remote display. Comes with 100' of cable.
Remote display for Tristar MPPT. Comes with 100' of cable.
Morningstar’s newest controller, the TriStar is a three function controller that provides reliable solar battery charging, load control or diversion regulation. This controller operates in any one of these three modes at one time. Multiple controllers may be used in the same system to provide multiple functions. This unit will integrate into the rest of your system as it uses standardized knockout spacing. It will directly replace a Xantrex C-series controller. All units will operate at ...
All units will operate at ...
Morningstar’s TriStar MPPT solar controller with TrakStar Technology™ is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 3kW. The controller provides the industry’s highest peak efficiency of 99% and significantly less power loss compared to other MPPT controllers. The TriStar MPPT features a smart tracking algorithm that maximizes the energy harvest from the PV by rapidly finding the solar array peak power point with extremely ...
The TriStar MPPT features a smart tracking algorithm that maximizes the energy harvest from the PV by rapidly finding the solar array peak power point with extremely ...
The Xantrex Solar Charge Controller is a photovoltaic (PV) charge controller that tracks the electrical maximum power point of a PV array to deliver the maximum available current for charging batteries. The XW SCC can be used with 12, 24, 36, 48, and 60-volt DC battery systems. The XW SCC is designed to regulate PV input only. It is not designed to work with wind or hydro generators. Two or three-stage charging process, with manual equalization to maximize system performance and
(250) 727-0522
Wish List
