Xantrex Battery Temperature Sensor is designed for use with DR and UX Inverters and C-Series Charge Controllers. The BTS is standard on SW and PS Inverters. The BTS mounts on a terminal post of a battery in a bank or on the side of a battery and measures its temperature. It sends precise information to the charger or charge controller, which automatically adjusts voltage to ensure full battery charge, depending on the ambient temperature of your battery installation.
Xantrex Battery Temperature Sensor is designed for use with DR and UX Inverters and C-Series Charge Controllers. The BTS is standard on SW and PS Inverters.
The BTS mounts on a terminal post of a battery in a bank or on the side of a battery and measures its temperature. It sends precise information to the charger or charge controller, which automatically adjusts voltage to ensure full battery charge, depending on the ambient temperature of your battery installation.
Xantrex Battery Temperature Sensor is designed for use with DR and UX Inverters and C Series Charge Controllers. The BTS is standard on SW and PS Inverters. The BTS mounts on a terminal post of a battery in a bank or on the side of a battery and measures its temperature. It sends precise information to the charger or charge controller, which automatically adjusts voltage to ensure full battery charge, depending on the ambient temperature of your battery installation.
Xantrex Battery Temperature Sensor is designed for use with DR and UX Inverters and C Series Charge Controllers. The BTS is standard on SW and PS Inverters.
The C35 controller is a 3-stage PWM controller. It can operate as a charge controller or a load controller, but not at the same time. The C35 can be used in 12V or 24V systems, while the C40 can be used in 12V, 24V or 48V systems. C35 controllers can even be used as a diversion regulator for hydro and wind systems by sending excess power to an external heating element if the batteries are full. Xantrex also offers an optional battery temperature sensor (15’ or 35’) as well as a very ...
Xantrex also offers an optional battery temperature sensor (15’ or 35’) as well as a very ...
A Controller for Virtually Any DC Charging Source The Xantrex C40 has long been the mainstay of our charge controller line-up, its versatility and reliability have made it an industry standard. Now the Xantrex C40 is joined by two companion controllers, the C35 and C60. All three of these fully solid state, microprocessor-driven controllers are UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the
The Xantrex C40 has long been the mainstay of our charge controller line-up, its versatility and reliability have made it an industry standard. Now the Xantrex C40 is joined by two companion controllers, the C35 and C60. All three of these fully solid state, microprocessor-driven controllers are UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the
A Controller for Virtually Any DC Charging Source The Xantrex C-60 controller is one of the world's most advanced work horse charge controllers available. Standard Features: Solid-State microprocessor controls that increase system performance Field adjustable set points with removable knobs Electronically protected for short circuit, overload, over temperature and reverse polarity Auto-resetting over current protection - no fuses to replace or ...
The Xantrex C-60 controller is one of the world's most advanced work horse charge controllers available.
Standard Features:
This optional remote for the C35/40/60 controller allows monitoring of battery voltage, DC amperage, and cumulative amp/hours since last reset. Replaces front panel on the C35/40/60 (not included). Also available as a remote mount unit - up to 100 feet away from the controller.
This optional remote for the C40/60 controller allows monitoring of battery voltage, DC amperage, and cumulative amp/hours since last reset. Comes with 100' of wire to allow for remote installation. Also available for non-remote installation, replaces faceplate on the C40/60.
For safety sake and to meet Electrical Code specifications, you are required to provide a means of disconnection as well as over current protection. This product does both. Available in 250 or 175 amps continuous rating, expandable to include a second inverter as well as auxiliary breakers for solar / wind generators. This product comes in a powder-coated metal enclosure designed to give your installation a truly professional look and feel. The large DC breaker is available as a separate ...
This product comes in a powder-coated metal enclosure designed to give your installation a truly professional look and feel. The large DC breaker is available as a separate ...
For safety's sake and to meet Electrical Code specifications, you are required to provide a means of disconnection as well as over-current protection. This product does both. Available in 250 or 175 amps continuous rating, expandable to include a second inverter as well as auxiliary breakers for solar / wind generators. This product comes in a powder-coated metal enclosure designed to give your installation a truly professional look and feel. The large DC breaker is available as a separate
This product comes in a powder-coated metal enclosure designed to give your installation a truly professional look and feel. The large DC breaker is available as a separate
Conduit boxes are available for the SW and DR series inverters. These boxes mount on the ends of the inverter and provide a safe and professional cover for the AC and DC wiring. They are required for installations that must pass electrical inspection.
Xantrex digital Echo-Charge is designed to charge auxiliary or starting batteries from an inverter/charger or other charging source with limited voltage drop. The Xantrex Echo-Charge detects when the battery bank is being charged and directs a portion of the charge current to auxiliary or starting batteries. The maximum charger current offered by Echo-Charge is limited to 15 amps. Product Features 15 A maximum charge current Automatically adjusts for 12 or 24 volt ...
Product Features
A 175 amp breaker. Also available in 250 amp.
A 250 amp breaker. Also available in 175 amp.
This monitor easily connects to Xantrex GT Series inverters using standard off-the-shelf CAT5 Ethernet cable. Built-in flash memory stores PV system data and makes software upgrades simple. This connection also provides power to the monitor, removing the need for a monitor power supply. Product Features: Compatible with all Xantrex GT Series Grid Tie Solar Inverters Displays total PV system performance in daily, monthly, and lifetime views, on a graphical 128 x ...
Product Features:
Xantrex GT Grid Intertie Inverter The GT Solar Grid Tie Inverter is a high performance PV string inverter that offers high efficiency, lower installed cost, improved aesthetics and high reliability. A High Performance String Inverter: 95% efficiency maximizes your PV investment Fast MPPT tracking algorithm ensures maximum energy harvest from your array under any conditions Excellent thermal performance: provides full ...
The GT Solar Grid Tie Inverter is a high performance PV string inverter that offers high efficiency, lower installed cost, improved aesthetics and high reliability.
A High Performance String Inverter:
Xantrex XW Series inverters offer an innovative, integrated design which minimizes external balance-of-system components allowing for much quicker and easier installation. The XW Series offers pure sine-wave capability as well as split-phase operation right out of the box for 120 Vac and /or 240 Vac solutions.
The XW Series offers pure sine-wave capability as well as split-phase operation right out of the box for 120 Vac and /or 240 Vac solutions.
The Prowatt 3000 is designed for high power and industrial applications. Its high surge output is ideal for heavy-duty loads or multiple smaller AC loads. It can often be used in place of a generator for large intermittent loads. Common applications include: washers, compact dryers, circular saws, air compressors, pumps, air conditioners, refrigerators and freezers. Provides 3000 Watts of Portable AC Power. Product Features 2500 watts continuous, 5000 watt surge ...
A mid-range inverter designed for industrial and recreational applications, the Prowatt 800 is ideal for heavy-duty AC loads or smaller, multiple AC loads. Common applications include microwaves, TV/VCRs and a variety of small power tools. Features 1000 watts continuous, 2000 watt surge capability Dual GFCI outlet for safer operation Supports addition of external AC outlets - Built-in LED display for DC volts and amps Includes remote on/off ...
Features
The SWCA serial communications adapter allows for remote set-up, adjustment, troubleshooting and monitoring of up to eight SW or PS series inverters from a personal computer. The package includes the adapter, DOS based software, 25' (7.6 m) of cable and a DB9 connector. Connection to the SWCA can be via 4 conductor phone-type cable or with standard PC modems over telephone line.
The package includes the adapter, DOS based software, 25' (7.6 m) of cable and a DB9 connector. Connection to the SWCA can be via 4 conductor phone-type cable or with standard PC modems over telephone line.
They are required for installations that must pass electrical inspection.
The SW Interface is used to stack two identical SW or PS Inverters in series. This will provide twice the power output in a 3-wire, 120/240 VAC, 60 Hz configuration. The SWI is only available for use with North American SW and PS inverters.
The SWI is only available for use with North American SW and PS inverters.
The ACCB connects to the AC side of a SW Plus Series inverter and accepts AC conduit runs. It protects the cable connections to the inverter and provides an inverter by-pass (for a single AC source) and AC disconnect breakers. Additional circuit breakers may be added to the ACCB.
Additional circuit breakers may be added to the ACCB.
The ACCB connects to the AC side of a SW Plus Series inverter and accepts AC conduit runs. It protects the cable connections to the inverter and provides an inverter by-pass (for a single AC source) and AC disconnect breakers.
AC bypass breaker assembly for use with two inverters.
The DCCB for the SW Plus Series connects to the DC side of the inverter and accepts DC conduit runs. The DCCB provides protection to the DC cables connected to the inverter. Knockouts are provided for 1/2", 3/4" and 2" sizes. With 175 amp Breaker.
Knockouts are provided for 1/2", 3/4" and 2" sizes. With 175 amp Breaker.
The DCCB for the SW Plus Series connects to the DC side of the inverter and accepts DC conduit runs. The DCCB provides protection to the DC cables connected to the inverter. Knockouts are provided for 1/2", 3/4" and 2" sizes. With 250 amp Breaker.
Knockouts are provided for 1/2", 3/4" and 2" sizes. With 250 amp Breaker.
The SW PLUS Interface is used to stack two identical SW PLUS Inverters in series. This will provide twice the power output in a 3-wire, 120/240 VAC, 60 Hz configuration.
The XBP is a two-piece, steel back plate for creating a unified power panel using one or two Sine Wave Plus Inverter Chargers. The combined panel is designed to accommodate the following components: one or two Sine Wave Plus Inverters, or one Sine Wave Plus Inverter and a TX Autotransformer plus: one AC Conduit Box-Long (ACCB-L), and one or two DC Conduit Box-Long (DCCB-L). Two DCCB-L's requires the XBP-DC.
The combined panel is designed to accommodate the following components: one or two Sine Wave Plus Inverters, or one Sine Wave Plus Inverter and a TX Autotransformer plus: one AC Conduit Box-Long (ACCB-L), and one or two DC Conduit Box-Long (DCCB-L). Two DCCB-L's requires the XBP-DC.
This transformer allows you to power 240 VAC loads (e.g. power tools, water pumps) from a single 120 VAC inverter (providing the inverter is suitably sized). It can be used in reverse to convert 240 VAC power to 120 VAC as well as to boost line voltage for long distance installations or as a generator balancing transformer. It has an indoor powder-coated enclosure with knockouts for conduit connections and two pole 25 A circuit breaker/disconnect.
It can be used in reverse to convert 240 VAC power to 120 VAC as well as to boost line voltage for long distance installations or as a generator balancing transformer.
It has an indoor powder-coated enclosure with knockouts for conduit connections and two pole 25 A circuit breaker/disconnect.
Redesigned, High Performance, Worldwide Charging Xantrex TRUECHARGE-2 Battery Chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, TRUECHARGE-2 Battery Chargers feature low electrical interference and superior, efficient, power factor corrected multistage charging. TRUECHARGE-2 Battery Chargers can be mounted virtually anywhere, given their unique drip-proof design. Trouble-free installation is ...
Xantrex TRUECHARGE-2 Battery Chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, TRUECHARGE-2 Battery Chargers feature low electrical interference and superior, efficient, power factor corrected multistage charging.
TRUECHARGE-2 Battery Chargers can be mounted virtually anywhere, given their unique drip-proof design. Trouble-free installation is ...
Always carry a spare fuse!
This product has a DC rated class T fuse in with a clear, protective removable cover. It is essential that high current devices such as inverters are protected from wiring faults and overloads.
Ready power and convenient mobility. These sum up the xPower 300 - the electronic generator that's portable and rechargeable. With 300 watts of continuous power and a surge of 500 watts, items like desktop computers, monitors, full size fax machines, battery chargers and AC adapters for notebook computers, cellular phones, camcorders can be used virtually anywhere. ...
Ready power and convenient mobility. These sum up the xPower 300 - the electronic generator that's portable and rechargeable.
With 300 watts of continuous power and a surge of 500 watts, items like desktop computers, monitors, full size fax machines, battery chargers and AC adapters for notebook computers, cellular phones, camcorders can be used virtually anywhere. ...
Heavy-duty XPower Powerpack 600HD delivers 600 watts of portable AC power with vehicle jumpstart, AM/FM radio and digital alarm clock Powered by a rechargeable 28AH battery, the XPower Powerpack 600HD provides up to 600 watts of AC power. It can jump start a car, truck, boat or small RV. The system also operates a wide range of DC products. Ideal for power emergencies, XPower Powerpack 600HD comes with a built-in emergency light and jumper cables. Integrated AM/FM radio and ...
Powered by a rechargeable 28AH battery, the XPower Powerpack 600HD provides up to 600 watts of AC power. It can jump start a car, truck, boat or small RV. The system also operates a wide range of DC products. Ideal for power emergencies, XPower Powerpack 600HD comes with a built-in emergency light and jumper cables. Integrated AM/FM radio and ...
The XW AGS is a Xanbus™-enabled device that can automatically activate a generator to provide an XW Series Inverter/Charger with power to recharge depleted batteries or assist with heavy loads. Compatible with popular generators, the XW AGS adds intelligence to power management and eliminates time spent monitoring batteries and inverter loads. The XW AGS can be configured to start the generator in response to low battery voltage, thermostat operation, or load size on the inverter battery. A ...
The XW Conduit Box is a bare conduit box (no wires) that can be used to create systems larger than two inverters or to retrofit XW Inverters into existing systems which may already have AC/DC disconnects.
Xantrex™ Communications Gateway helps the user stay informed with computer access or a simple report. The Xantrex™ Communication Gateway bridges the gap between a Xantrex GT or XW System and the system owner’s computer, making it the central component for a residential or small commercial remote monitoring system.
Xantrex™ Communications Gateway helps the user stay informed with computer access or a simple report.
The Xantrex Solar Charge Controller is a photovoltaic (PV) charge controller that tracks the electrical maximum power point of a PV array to deliver the maximum available current for charging batteries. The XW SCC can be used with 12, 24, 36, 48, and 60-volt DC battery systems. The XW SCC is designed to regulate PV input only. It is not designed to work with wind or hydro generators. Two or three-stage charging process, with manual equalization to maximize system performance and
The XW Power Distribution Panel with conduit box is factory-wired and labeled to support a code-compliant single-inverter installation. The XW PDP can be configured to mount on either side of the inverter/charger. Internal wiring and breakers can be added to expand the XW System with up to three inverters, four charge controllers, or other equipment to support larger systems, including three-phase. Accommodates both AC and DC breakers and wiring for three XW Hybrid ...
The XW SCP is a Xanbus™-enabled device featuring a graphical, backlit LCD screen that displays system configuration and diagnostic information for all devices connected to the network. When installed as an XW System accessory, the XW SCP eliminates the need for separate control panels for each device and gives a single point of control to set up and monitor an entire XW Power System.
This kit comes with everything you need to add a second inverter to an XW power system. This kit includes: Conduit box Breakers Pre-cut and labeled cables
This kit comes with everything you need to add a second inverter to an XW power system.
The XW Hybrid Inverter/Charger is a true sine wave inverter/charger that can be used for both residential and commercial applications - stand-alone, grid-backup, and grid-tie with battery energy storage. Capable of being grid-interactive or grid-independent, the XW Series will operate with generators and renewable energy sources to provide full-time or backup power. Integrated balance-of-systems components 120/240-volt split-phase operation and true sine wave output ...
The XW Hybrid Inverter/Charger is a true sine wave inverter/charger that can be used for both residential and commercial applications; stand-alone, grid-backup, and grid-tie with battery energy storage. Capable of being grid-interactive or grid-independent, the XW Series will operate with generators and renewable energy sources to provide full-time or backup power. Integrated balance-of-systems components 120/240-volt split-phase operation and true sine wave output ...
(250) 727-0522
Wish List
