This controller can be used as a constant voltage regulator for any sensitive loads if you are running a 24V load off a 12V battery. It can also be used to keep your load voltage constant (24.0V) as the battery discharges from 14 to 11V. Contains integral Fusing with LVD. This regulator takes your battery voltage, regardless of what it is, and produces a constant 24.0V to ensure your loads are operating at optimum performance.
It can also be used to keep your load voltage constant (24.0V) as the battery discharges from 14 to 11V. Contains integral Fusing with LVD.
This regulator takes your battery voltage, regardless of what it is, and produces a constant 24.0V to ensure your loads are operating at optimum performance.
This controller can be used as a constant voltage regulator for any sensitive loads if you are running a 48V load off a 12V battery. It can also be used to keep your load voltage constant (48.0V) as the battery discharges from 14 to 11V. Contains integral Fusing with LVD. This regulator takes your battery voltage, regardless of what it is, and produces a constant 48.0V to ensure your loads are operating at optimum performance.
It can also be used to keep your load voltage constant (48.0V) as the battery discharges from 14 to 11V. Contains integral Fusing with LVD.
This regulator takes your battery voltage, regardless of what it is, and produces a constant 48.0V to ensure your loads are operating at optimum performance.
This controller can be used as a constant voltage regulator for any sensitive loads if you are running a 48V load off a 24V battery. It can also be used to keep your load voltage constant (48.0V) as the battery discharges from 28 to 22V. Contains integral Fusing with LVD. This regulator takes your battery voltage, regardless of what it is, and produces a constant 48.0V to ensure your loads are operating at optimum performance.
It can also be used to keep your load voltage constant (48.0V) as the battery discharges from 28 to 22V. Contains integral Fusing with LVD.
This rugged and versatile unit is used to power a small load at 12V from a 24V battery, or to power a small 24V load from a 12V battery. It functions both ways, producing 12V @ 20 Amps from a 24V input or can be connected backwards to produce 24V @ 10 Amps from a 12V input.
This regulator takes your variable voltage from a 12V battery, regardless of what it is, and produces a constant 12.0V to ensure your loads are operating at optimum performance.
This regulator takes your variable voltage from a 24V battery, regardless of what it is, and produces a constant 24.0V to ensure your loads are operating at optimum performance.
This regulator takes your variable voltage from a 48V battery, regardless of what it is, and produces a constant 48.0V to ensure your loads are operating at optimum performance.
Also known as an LCB, these devices are used with PV direct applications such as water pumping. This unit will allow a pump to start earlier in the day, run longer and pump more water. Typical increases in daily water volume of up to 40% is common. Almost every water PV-direct water pumping system requires one of these.
This unit is designed to power a 12VDC load from a 24VDC battery bank.
This unit is designed to power a 12VDC load from a 48VDC battery bank.
This unit is designed to power a 24VDC load from a 48VDC battery bank.
These products are used in solar direct pumping applications. They can achieve up 30 - 90 % increase in your water pump than connecting your motor directly to the solar panels. • Greatly increases water flow, even under reduced sunlight conditions (over 40% likely) • Voltage limited output • Transient protected on the input and output • Float switch input for on/off control • Single unit able to switch from 12V to 24V •
These products are used in solar direct pumping applications. They can achieve up 30 - 90 % increase in your water pump than connecting your motor directly to the solar panels.
• Greatly increases water flow, even under reduced sunlight conditions (over 40% likely) • Voltage limited output • Transient protected on the input and output • Float switch input for on/off control • Single unit able to switch from 12V to 24V •
These products are used in solar direct pumping applications. They can achieve up 30 - 90 % increase in your water pump than connecting your motor directly to the solar panels. • Greatly increases water flow, even under reduced sunlight conditions (over 40% likely) • Voltage limited output • Transient protected on the input and output • Float switch input for on/off control • Single unit able to switch from 12V to 24V • ...
• Greatly increases water flow, even under reduced sunlight conditions (over 40% likely) • Voltage limited output • Transient protected on the input and output • Float switch input for on/off control • Single unit able to switch from 12V to 24V • ...
(250) 727-0522
Wish List
