FW-CCB and FW-CCB2 mounting brackets allow OutBack MX60 charge controllers to be mounted on the side of FW500-DC or FW1000-DC enclosures.
FW-CCB2-T mounting bracket allows OutBack MX60 charge controllers to be mounted on the top of FW500-DC or FW1000-DC enclosures.

For use with the FW500-AC and FW1000-AC breaker boxes.
Field installable kit with wire and all required ring terminals.
Includes six 60A 120VAC single pole DIN mount breakers and sliding bypass interlock plate.
Designed for 120/240V split phase systems with two inverters.

For use with the FW1000-AC breaker box.
Field installable kit with wire and all required ring terminals.
Includes 12 60A 120VAC single pole DIN mount breakers and sliding bypass interlock plate.
Designed for 120/240V split phase systems with four inverters.

For use with the FW250 breaker box.
Field installable kit with wire and all required ring terminals.
Includes three 60A 120VAC single pole PANEL mount breakers and sliding bypass interlock plate.
Designed for 120V single phase systems with one inverter.

FLEXware MP is a one piece, powder coated aluminum mounting plate for FLEXware 500 and FLEXware 1000.
Utilizing stainless steel mounting hardware, the integrated locating bolts make installation quick and easy by providing guides to line up enclosures and inverter/chargers.
A single FLEXware MP is designed to accommodate FLEXware 500 while two FLEXware MP are utilized in a FLEXware 1000 configuration.

Dimensions: 21"(h) x 47"(w) x 1"(d)

The Outback Power systems FLEXware PV combiner series sets the new standard for PV balance-of-system hardware. Ideal for both small or large systems, the FLEXware PV-8 and FLEXware PV-12 accommodates the overcurrent protection requirements of your application. From 150VDC breaker for low voltage PV systems, to 600VDC fuse holders for high voltage PV systems, the FLEXware PV combiner series handles it all.

Designed to survive in outdoor environments, the rainproof, UL type ...

The Outback Power systems FLEXware PV combiner series sets the new standard for PV balance-of-system hardware. Ideal for both small or large systems, the FLEXware PV-8 and FLEXware PV-12 accommodates the overcurrent protection requirements of your application. From 150VDC breaker for low voltage PV systems, to 600VDC fuse holders for high voltage PV systems, the FLEXware PV combiner series handles it all.

Designed to survive in outdoor environments, the rainproof, UL type ...

For applications with large power requirements such as large residential, commercial or village power systems. FLEXware 1000 system architecture is capable of supporting up to four OutBack FX series inverter/chargers, four MX60 charge controllers, and all the required AC and DC components and wiring. Utilizing a compact design, FLEXware 1000 AC and DC enclosures accommodate all of the essential protective devices with lots of room for additional breakers and large cable ...

For applications with large power requirements such as large residential, commercial or village power systems. FLEXware 1000 system architecture is capable of supporting up to four OutBack FX series inverter/chargers, four MX60 charge controllers, and all the required AC and DC components and wiring. Utilizing a compact design, FLEXware 1000 AC and DC enclosures accommodate all of the essential protective devices with lots of room for additional breakers and large cable ...

For applications with modest power requirements such as cabins, remote communication sites and back-up power systems. The all-aluminum FLEXware 250 accommodates all of the essential protective devices in the smallest possible space at the lowest installed cost. Utilizing an extremely compact design and unique mounting features, up to two FLEXware 250 can be mounted on either side of a single FX series inverter/charger.

The ETL listed powder coated enclosure provides breaker spaces for ...

For applications with medium power requirements such as homes, light commercial, or larger back-up power systems. FLEXware 500 system architecture is capable of supporting up to two OutBack FX series inverter/chargers, up to two MX60 charge controllers and all the associated AC and DC components.

Thanks to a very compact design, FLEXware 500 AC and DC enclosures mount with FLEXware MP in either a horizontal or vertical orientation to allow installation in more space-limited locations for a ...

For applications with medium power requirements such as homes, light commercial, or larger back-up power systems. FLEXware 500 system architecture is capable of supporting up to two OutBack FX series inverter/chargers, up to two MX60 charge controllers and all the associated AC and DC components.

Thanks to a very compact design, FLEXware 500 AC and DC enclosures mount with FLEXware MP in either a horizontal or vertical orientation to allow installation in more space limited locations for a ...

The Outback FX inverter is a continuous rated modular "building" block sine wave inverter/charger which can be used for both small and large power systems. Each Outback FX inverter/charger is a complete power conversion system - DC to AC inverter, battery charger, and AC transfer switch.

Additional inverter/chargers can be connected at any time in either parallel (120 VAC), series (120/240 VAC), or even three-phase (120/208VAC) configurations, which allows the system to be tailored to ...

The Outback FX inverter is a continuous rated modular "building" block sine wave inverter/charger which can be used for both small and large power systems. Each Outback FX inverter/charger is a complete power conversion system - DC to AC inverter, battery charger, and AC transfer switch.

Additional inverter/chargers can be connected at any time in either parallel (120 VAC), series (120/240 VAC), or even three-phase (120/208VAC) configurations, which allows the system to be tailored to ...

The Outback FX inverter is a continuous rated modular "building" block sine wave inverter/charger which can be used for both small and large power systems. Each Outback FX inverter/charger is a complete power conversion system - DC to AC inverter, battery charger, and AC transfer switch.

Additional inverter/chargers can be connected at any time in either parallel (120 VAC), series (120/240 VAC), or even three-phase (120/208VAC) configurations, which allows the system to be tailored to ...

The Outback FX inverter is a continuous rated modular "building" block sine wave inverter/charger which can be used for both small and large power systems. Each Outback FX inverter/charger is a complete power conversion system - DC to AC inverter, battery charger, and AC transfer switch.

Additional inverter/chargers can be connected at any time in either parallel (120 VAC), series (120/240 VAC), or even three-phase (120/208VAC) configurations, which allows the system to be tailored to ...

The OutBack GTFX-2524 is designed to survive harsh environments anywhere in the world.

The GTFX2524 incorporates a unique die-cast aluminum, sealed housing, which keeps the electronic components cool while protecting them from the major causes of inverter failure - corrosion, dust, insect and animal damage - even temporary submersion and pressure washing.

All of the GTFX models also now include a standard external cooling fan to improve operation in high ambient temperature conditions ...

The OutBack GTFX-3048 is designed to survive harsh environments anywhere in the world.

The GTFX models incorporate a unique die-cast aluminum, sealed housing, which keeps the electronic components cool while protecting them from the major causes of inverter failure - corrosion, dust, insect and animal damage - even temporary submersion and pressure washing.

All of the GTFX models also now include a standard external cooling fan to improve operation in high ambient temperature conditions ...

The OutBack Power Systems GVFX3524 is designed to survive harsh environments anywhere in the world.

The GVFX 3524 incorporates a unique die-cast aluminum, vented housing, which keeps the electronic components cool while increasing the power output of the unit.

The OutBack Power Systems GVFX 3524 inverter is a modular "building block" sine wave inverter/charger that can be used for both small and large power systems.

Each OutBack Power Systems inverter/charger is a complete power

The OutBack Power Systems GVFX-3648 is designed to survive harsh environments anywhere in the world.

The GVFX 3648 incorporates a unique die-cast aluminum, vented housing, which keeps the electronic components cool while increasing the power output of the unit.

The Outback Power Systems GVFX3648 inverter is a modular "building block" sine wave inverter/charger that can be used for both small and large power systems. Each OutBack inverter/charger is a complete power conversion system - ...

AC breaker - 10 amp 120 VAC Outback - 0.50" wide

Single Pole OutBack 15 amp, 120V AC Breaker

OutBack AC breakers are hydraulic magnetic type which are not sensitive to ambient temperature

DIN rail snap-in mount

Can be used for AC input or load circuits

Width: .5"

OBAC-15, 15 amp, Single Pole 120V AC OutBack Breaker

Single Pole OutBack 20 amp, 120V AC Breaker.

OutBack AC breakers are hydraulic magnetic type which are not sensitive to ambient temperature.

DIN rail snap-in mount.

Can be used for AC input or load circuits.

Width: .5"

OBAC-20, 20 amp, Single Pole 120V AC OutBack Breaker

Single Pole OutBack 25D amp, 120V AC Breaker.

OutBack AC breakers are hydraulic magnetic type which are not sensitive to ambient temperature.

DIN rail snap-in mount.

Can be used for AC input or load circuits.

OBAC-25D, 25 amp, Double Pole 120V AC OutBack Breaker

AC Breaker - 30Amp 120 VAC OutBack - 0.5" wide

AC breaker - 50 amp 120 VAC OutBack - 0.5" wide

AC breaker - 60 amp 120 VAC Square-D QOU - 0.75” wide

OutBack DC Breaker 1 amp 125 VDC with 1/4" stud terminals.

Requires one small 3/4" breaker space.

AIC Rating: 7.5K at 80 VDC

OutBack DC Breaker 10 amp 125 VDC with 1/4" stud terminals.

Requires one small 3/4" breaker space.

AIC Rating: 7.5K at 80 VDC

OutBack DC Breaker 15 amp 125 VDC with 1/4" stud terminals.

Requires one small 3/4" breaker space.

AIC Rating: 7.5K at 80 VDC

OutBack DC Breaker 175 amp 125VDC with 5/16" stud terminals.

Requires one medium 1" breaker space.

AIC Rating: 25K at 65VDC

OutBack DC Breaker 20 amp 125 VDC with 1/4" stud terminals.

Requires one small 3/4" breaker space.

AIC Rating: 7.5K at 80 VDC

DC breaker - 250 amp 125 VDC large size – 1.5” wide

OutBack DC Breaker 40 amp 125 VDC with 1/4" stud terminals.

Requires one small 3/4" breaker space.

AIC Rating: 7.5K at 80 VDC

DC breaker - 70 amp 125 VDC small size – 0.75” wide

The FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power Systems.

The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers.

Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps or 80 ...

The FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power Systems.

The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers.

Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps or 80 ...

The OutBack Power Systems FLEXnet™ DC is the ultimate in DC System monitoring devices.

The integrated networked communications make valuable, usable data available from your system, viewable on an OutBack MATE communications device, providing you with the answers you need concerning your system’s health, performance and efficiency.

Outback FX-ACA AC wiring compartment extension and 2" conduit adapter.

Required when mounting an FX inverter/charger to an OutBack PS2AC or PS4AC.

Includes two 1" conduit knockouts and an AC outlet knockout.

The Outback FX-DCA DC Conduit Adapter allows connection of 2” DC conduit or enclosure to a FX or VFX inverter.

The OutBack HUB-10 system communications manager allows the interconnection of up to ten OutBack power conversion devices with the MATE. The interconnection creates a completely integrated Power System that is coordinated and managed by the MATE.

The OutBack HUB-10 communicates stacking phase, load share, incremental start-up and shut-down information directly between the inverters. Interconnection cabling is standard ethernet CAT5 eight wire with RJ45 modular jacks. The HUB-10 is ...

The OutBack HUB-4 system communications manager allows the interconnection of up to four power conversion devices with the MATE. The interconnection creates a completely integrated Power System that is coordinated and managed by the MATE.

The OutBack HUB-4 communicates stacking phase, load share, incremental start-up and shut-down information directly between the inverters. Interconnection cabling is standard ethernet CAT5 eight wire with RJ45 modular jacks. The HUB is powered via ...

OutBack Mate for one or more FX, VFX and/or MX60. Four line 80 character LCD display with backlight. RS232 port for PC connection (software not included). Wall surface mount with 3' and 50' catV cable included.

Highly recommended for any OutBack inverter system for setpoint adjustment and monitoring. Plugs into the Stack-2 or Stack-4 or Hub-4 or Hub-10 for stacked inverters.

We recommend the Hub over the Stack so all inverters can be monitored without unplugging cables (the ...

OutBack Mate for one or more FX, VFX and/or MX60. Four line 80 character LCD display with backlight. RS232 port for PC connection (software not included). Wall surface mount with 3' and 50' catV cable included.

Highly recommended for any OutBack inverter system for setpoint adjustment and monitoring. Plugs into the Stack-2 or Stack-4 or Hub-4 or Hub-10 for stacked inverters.

We recommend the Hub over the Stack so all inverters can be monitored without unplugging cables (the ...

Power System AC Disconnect breaker assembly with quad 60A-AC IOB assembly (for 4 Outback inverters). Already installed in PSAC enclosure and ready to go (inverters not included).

Outback quad stack DC disconnect box. Already prewired and ready to go (inverter are not included).

Mounting Plate - 36"x50" steel backplane for mounting SW, PS, DR, etc inverters. Already prewired for an Outback quad stack and ready to go (inverters not included).

The OutBack PSX-240 auto transformer can be used for step-up, step-down, generator and split phase output balancing or as a series stacked inverter to load balancing auto-former.

Incorporating a transformer with 120 volt/30 amp primary and secondary side, a temperature activated cooling fan and a 25 amp dual breaker in a steel enclosure, the PSX-240 is ready to install in your custom application.

Use for 120 or 240 VAC 60 Hz systems only.

Powering 240 volt items like deep well ...

Remote Temperature Sensor for FX, VFX or MX60 products

Terminal Bus Bar kit with black plastic insulators – use as L1 hot or DC negative.

Terminal Bus Bar kit with red plastic insulators – use as L2 hot or DC positive.

4 kVA autotransformer 120/240 VAC 60 Hz includes two pole 25 amp OBAC breaker

Autotransformer Fan 120 VAC 60 Hz – increases continuous rating to 6kW AC

DC Ground Fault Protection / Dual Circuit – uses three of the small breaker spaces

This is the older-style Outback quad stack power panel using the green PS equipment that was available before the Flexware equipment.

The PS equipment is more shallow and much easier to work with than the newer Flexware FW1000 system, but it functions exactly the same. This prewired power panel includes the DC box with breakers and the AC box with breakers prewired on a steel backplate.

The inverters are not included, but we can easily add any Outback inverter you require for your ...

OutBack Power Panels contain the robust and modular OutBack products.

The new Midnight Solar E-Panel is a compact power system for one FX or VFX series inverter/chargers, one MX60 MPPT charge controller, a MATE system controller and all the associated AC and DC components of a renewable energy power conversion system.

These inverters provide True Sine Wave power that will provide your house with power of a quality as good or better then the local utility.

OutBack Power Panels contain the robust and modular OutBack products.

The new OutBack Power Systems Flexware 500 power system for one or two FX or VFX series inverter/chargers, up to two MX60 MPPT charge controllers, a MATE system controller and all the associated AC and DC components of a renewable energy power conversion system.

These inverters provide True Sine Wave power that will provide your house with power of a quality as good or better then you are used to from the ...

OutBack Power Panels contain the robust and modular OutBack products.

The new OutBack Power Systems Flexware 500 power system for one or two FX or VFX series inverter/chargers, up to two MX60 MPPT charge controllers, a MATE system controller and all the associated AC and DC components of a renewable energy power conversion system.

These inverters provide True Sine Wave power that will provide your house with power of a quality as good or better then you are used to from the ...

OutBack Power Panels contain the robust and modular OutBack products.

The new Midnight Solar E-Panel is a compact power system for one FX or VFX series inverter/chargers, one MX60 MPPT charge controller, a MATE system controller and all the associated AC and DC components of a renewable energy power conversion system.

These inverters provide True Sine Wave power that will provide your house with power of a quality as good or better then the local utility.

OutBack Power Panels contain the robust and modular OutBack products.

The new OutBack Power Systems Flexware 1000 power system for up to four FX or VFX series inverter/chargers, up to four MX60 MPPT charge controllers, a MATE system controller and all the associated AC and DC components of a renewable energy power conversion system.

These inverters provide True Sine Wave power that will provide your house with power of a quality as good or better then you are used to from ...

The new OutBack VFX inverter is a ventilated version of the original sealed FX series modular "building block" sine wave inverter/charger that can be used for both small and large power systems. By allowing cooler outside airflow through the internal electronics, more AC power is available and operation in extremely hot environments is improved compared to the sealed FX series.

Each OutBack VFX inverter/charger is a complete power conversion system - DC to AC inverter, battery charger ...

The new OutBack VFX inverter is a ventilated version of the original sealed FX series modular "building block" sine wave inverter/charger that can be used for both small and large power systems. By allowing cooler outside airflow through the internal electronics, more AC power is available and operation in extremely hot environments is improved compared to the sealed FX series.

Each OutBack VFX inverter/charger is a complete power conversion system - DC to AC inverter, battery charger ...

The new OutBack VFX inverter is a ventilated version of the original sealed FX series modular "building block" sine wave inverter/charger that can be used for both small and large power systems. By allowing cooler outside airflow through the internal electronics, more AC power is available and operation in extremely hot environments is improved compared to the sealed FX series.

Each OutBack VFX inverter/charger is a complete power conversion system - DC to AC inverter, battery charger ...