Morningstar’s Meter (RM-1) is a universal, four digit display with custom icons that is compatible with several Morningstar controllers and inverters. This meter provides comprehensive system information for easy monitoring including voltage, current and temperature. Compatible Products: SunSaver Duo Controller SunSaver MPPT Controller SureSine Inverter
Morningstar’s Meter (RM-1) is a universal, four digit display with custom icons that is compatible with several Morningstar controllers and inverters. This meter provides comprehensive system information for easy monitoring including voltage, current and temperature.
Compatible Products:
The Morningstar ProStar 15, features automatic voltage selection, temperature compensation, selectable battery type, low voltage disconnect with a manual disconnect switch and extremely low failure rate. Its ideal for unattended operation. Multiple ProStars can be wired in parallel to increase controller capacity as your needs grow. Standard Features: Versions available: 15 or 30 amp 12 / 24 or 48 volt negative or positive ground Estimated 15 year life
Standard Features:
The Morningstar ProStar 15M, features automatic voltage selection, temperature compensation, selectable battery type, low voltage disconnect with a manual disconnect switch and extremely low failure rate and a extensive Meter display of self-testing and system status. Its ideal for unattended operation. Multiple ProStars can be wired in parallel to increase controller capacity as your needs grow. Standard Features: Versions available: 15 or 30 amp 12 / 24 or 48 ...
The top end controller from Morningstar, features automatic voltage selection, temperature compensation, selectable battery type, low voltage disconnect with a manual disconnect switch and extremely low failure rate. Its ideal for unattended operation. Multiple ProStars can be wired in parallel to increase controller capacity as your needs grow.
Morningstar’s Relay Driver is a logic module which provides high level system control functions such as high/low voltage alarms, load control and generator start. The product controls four independent relay driver outputs by reading digital data inputs from Morningstar’s TriStar controller or by reading battery voltage when used in systems with other controllers. The relays need to have a trigger coil rated for the same voltage as the battery powering the unit (12V, 24V, 48V). Maximum current ...
The most advanced single panel controller available! Featuring the same advanced PWM circuitry as found in the SunSaver line up. The entire circuit is encapsulated in epoxy and is housed in a two square inch case with integrated leads. The most economical controller we carry!
Morningstar SunKeeper Charge Controller Morningstar’s SunKeeper solar controller provides a low cost regulated output directly from the solar module to maximize battery life in small solar power applications. The SunKeeper is epoxy encapsulated and rated for outdoor use. By mounting directly to the module junction box and wiring through the junction box knockout, the connection is weather-proof. This eliminates the need for an additional housing for the controller. The ...
Morningstar’s SunKeeper solar controller provides a low cost regulated output directly from the solar module to maximize battery life in small solar power applications. The SunKeeper is epoxy encapsulated and rated for outdoor use. By mounting directly to the module junction box and wiring through the junction box knockout, the connection is weather-proof. This eliminates the need for an additional housing for the controller.
The ...
Morningstar's advanced SunLight solar lighting controller combines the SunSaver design with a microprocessor for automatic lighting control functions. A rotary digital switch is used to select from 10 different lighting modes such as dawn to dusk, 2, 4, 6, 8, 10 hours of operation after sunset, few hours on after sunset, off for most of the night, then a few hours on before sunset. An extremely flexible and reliable controller which regulates solar charging as ...
Morningstar's advanced SunLight solar lighting controller combines the SunSaver design with a microprocessor for automatic lighting control functions.
A rotary digital switch is used to select from 10 different lighting modes such as dawn to dusk, 2, 4, 6, 8, 10 hours of operation after sunset, few hours on after sunset, off for most of the night, then a few hours on before sunset.
An extremely flexible and reliable controller which regulates solar charging as ...
The SunSaver Duo two-battery controller for RVs, caravans, boats and cottages is rated for 25 amps at 12 volts DC. This product will charge two separate and isolated batteries at the same time, such as a house and an engine battery, based on user selectable priorities. The SunSaver Duo employs Morningstar's legendary SunSaver controller technology, whose long-term track record for high reliability and improved battery charging is well recognized in the solar industry. This ...
The SunSaver Duo two-battery controller for RVs, caravans, boats and cottages is rated for 25 amps at 12 volts DC.
This product will charge two separate and isolated batteries at the same time, such as a house and an engine battery, based on user selectable priorities.
The SunSaver Duo employs Morningstar's legendary SunSaver controller technology, whose long-term track record for high reliability and improved battery charging is well recognized in the solar industry.
This ...
The SunSaver MPPT is an advanced maximum power point tracking (MPPT) battery charge controller for off-grid PV systems. It enables the use of high voltage, and thin film module arrays up to 400 watts provide a means to use up to a 36V array to charge a 24V or 12V battery. The SS_MPPT controller features a smart tracking algorithm that maximizes the energy harvest from the PV and provides load control to prevent over-discharge of the battery. 15 amps at 12/24 volts May be used for
The SS_MPPT controller features a smart tracking algorithm that maximizes the energy harvest from the PV and provides load control to prevent over-discharge of the battery.
These small controllers are field proven, reliable and economical. The circuits are encapsulated in epoxy for protection from the elements and are simple to use. LVD versions feature a non-adjustable low voltage disconnect. UL listed for installation in hazardous locations. LED status indicator.
LVD versions feature a non-adjustable low voltage disconnect. UL listed for installation in hazardous locations. LED status indicator.
Field proven reliability in this economical, fully featured, epoxy encapsulated controller. Controls up to 10A, with non-adjustable low voltage disconnect. UL listed for installation in hazardous locations. Five-year warranty.
UL listed for installation in hazardous locations. Five-year warranty.
Field proven reliability in this economical, fully featured, epoxy encapsulated controller. Controls up to 20A, with non-adjustable low voltage disconnect UL listed for installation in hazardous locations. Five-year warranty.
Field proven reliability in this economical, fully featured, epoxy encapsulated controller. Controls up to 6A and has a five-year warranty. UL listed for installation in hazardous locations.
Controls up to 6A and has a five-year warranty. UL listed for installation in hazardous locations.
Field proven reliability in this economical, fully featured, epoxy encapsulated controller. Controls up to 6A, with non-adjustable low voltage disconnect. UL listed for installation in hazardous locations. Five-year warranty.
Controls up to 6A, with non-adjustable low voltage disconnect. UL listed for installation in hazardous locations. Five-year warranty.
The SureSine inverter has been developed using Morningstar’s power electronics expertise and 25 years of experience with remote off-grid photovoltaic (PV) systems. This product is a pure sine wave inverter designed specifically to meet the needs of rural PV electrification requiring AC power including solar home systems, schools, community centres and health clinics. This inverter is also a good choice for small PV systems for telecom, remote cabins and weekend homes, and RV/caravans and boats.
Remote display. Comes with 100' of cable.
Remote display for Tristar MPPT. Comes with 100' of cable.
Morningstar’s newest controller, the TriStar is a three function controller that provides reliable solar battery charging, load control or diversion regulation. This controller operates in any one of these three modes at one time. Multiple controllers may be used in the same system to provide multiple functions. This unit will integrate into the rest of your system as it uses standardized knockout spacing. It will directly replace a Xantrex C-series controller. All units will operate at ...
All units will operate at ...
Morningstar’s TriStar MPPT solar controller with TrakStar Technology™ is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 3kW. The controller provides the industry’s highest peak efficiency of 99% and significantly less power loss compared to other MPPT controllers. The TriStar MPPT features a smart tracking algorithm that maximizes the energy harvest from the PV by rapidly finding the solar array peak power point with extremely ...
The TriStar MPPT features a smart tracking algorithm that maximizes the energy harvest from the PV by rapidly finding the solar array peak power point with extremely ...
(250) 727-0522
Wish List
