A simple box to hold four Midnite MNEPV or MNEAC breakers just like the MNENCL-4, but this one is larger and includes a ground/negative bus bar.

63 amp 150VDC DC ground fault protector (UL listed breaker assy)

Midnite Solar Mini DC Disconnect

An affordable DC breaker box

Special Features:

Midnite Solar - E-Panel for Magnum MM Inverters

Midnite Solar - E-Panel for Magnum MS-PAE Inverters

For those of you who already have an inverter, but are looking for the right disconnect box to tie your equipment together, we offer the E-Panel Lite.

The same unit as the standard model except the door does not accommodate an inverter, and does not include inverter cables.

Can be used with all makes of inverters.

Midnite Solar - E-Panel for Magnum Inverters

Midnite Solar - E-Panel for Outback Inverters

Midnite Solar - E-Panel for Xantrex XW Inverters

DIN mount AC breakers with set-screw compression terminals for 14 to #2AWG wire. Use these breakers for AC protection in OutBack FLEXware and MidNite E-panels.

DIN mount AC breakers with set-screw compression terminals for 14 to #2AWG wire. Use these breakers for AC protection in OutBack FLEXware and MidNite E-panels.

A simple box to hold four Midnite MNEDC80 charge controller breakers.

30 amp 150 VDC DIN rail mount breaker (13 mm wide)

63 amp 125 VDC DIN rail mount breaker (13 mm wide).

Use for charge controller input and output disconnects.

This .093” thick copper bus has three fingers spaced at ½” (13mm) intervals. One box lug is provided to accommodate 14-1/0 AWG wire.

MidNite Solar is proud to announce a new full featured PV combiner for the renewable energy industry. This combiner, model MNPV, has a couple of features not found on other combiners. The price is also substantially less than similar PV combiners.

Features:

This .093” thick copper bus has six fingers spaced at ½” (13mm) intervals. Two box lugs are provided to accommodate 14-1/0 AWG wire.

Black insulated feet (DC negative or PV input).
Four #6 and two 1/0 wire slots.

Red insulated feet (DC positive, PV input).
Four #6 and two 1/0 wire slots.

Black insulated feet (DC negative or AC L1 hot).
Four 1/0 & eleven #6 useable wire slots. Comes with two sizes of 10-32 screws

Red insulated feet (DC positive or AC L2 hot).
Four 1/0 & eleven #6 useable wire slots. Comes with two sizes of 10-32 screws

White insulated feet (AC neutral).
Four 1/0 & eleven #6 useable wire slots. Comes with two sizes of 10-32 screws

63A breaker for surge protection and manual stop switch for high wind protection. Add a digital ammeter and shunt to see power production.

This component is highly recommended for all Air-X and Air-Breeze installations.