The new PentaMetric battery monitor system offers a lot more capability than the TriMetric monitor. It measures 1 or 2 battery systems with a common negative. With one battery system, battery current plus two charging sources/loads can be measured.

Access data using LCD display unit and buttons up to 1,000 ft. from batteries. Relay output to control generator or external alarm. Audible and visual alarms for high and low battery conditions.

Complete system consists of 3 parts: Input ...

The new PentaMetric battery monitor system offers a lot more capability than the TriMetric monitor. It measures 1 or 2 battery systems with a common negative. With one battery system, battery current plus two charging sources/loads can be measured.

Access data using LCD display unit and buttons up to 1,000 feet from batteries. Relay output to control generator or external alarm. Audible and visual alarms for high and low battery conditions.

Complete system consists of 3 parts: Input

The new PentaMetric battery monitor system offers a lot more capability than the TriMetric monitor. It measures 1 or 2 battery systems with a common negative. With one battery system, battery current plus two charging sources/loads can be measured.

Access data using LCD display unit and buttons up to 1,000 feet from batteries. Relay output to control generator or external alarm. Audible and visual alarms for high and low battery conditions.

Complete system consists of 3 parts: Input

This meter is a sophisticated amp hour meter that also displays system voltage and charge or load amps with the push of a button. Seven other data monitoring functions provide information on battery efficiency, battery life, minimum battery voltage, maximum battery voltage and more. This data and the user programmed set points are stored even when disconnected from the battery.

Easily installed in a standard double gang switch box, this meter may be located hundreds of feet from ...

This adapter allows the TriMetric meter to operate with 48 volt systems, and also provides lightning protection for 12-48V systems. It mounts next to the TriMetric terminal block and fits within the box