Contact us directly if you would like any modifications to this kit. These
packaged systems are designed to be starting points with the most common system
components included. They are all built to order, programmed and tested in our
shop. Our experienced renewable energy installation technicians can help you
through the installation.
- Inverter: 6.8 kW continuous, 10 kW surge capacity
- Battery Storage: 40 kWh (870 Ah @ 48 V)
- Solar Array: 2.7 kW (3 x 300W PV Modules)
- Solar Power (summer peak): 10 kWh/day
Designed for those who will be living off-grid full time, this system provides you with the charging and storage that a modest house off-grid will require.
This system is based around the XW series true sine wave inverter/charger
from Schneider Electric (former Xantrex). This is a robust, field-proven inverter
that reliably produces very clean power.
With power output warrantied for 25 years, solar modules are an investment
you can depend on to produce for a long, long time. We have combined the solar
array with a Schneider maximum power point tracking (MPPT) advanced solar charge
controller. This will allow you to have your solar array at a higher voltage
than your batteries (up to 90V) which allows for smaller wire sizing reducing
installation costs. This controller will give you an extra 15-25% more power
from your solar array compared to the older-style PWM controllers and is required
for use with modern, high voltage PV Modules.
The batteries included in this system are heavy-duty 6V L16-types. These batteries
will have a 5-6year lifetime and give a good balance between capacity and economy.
The inverter and most of the electrical components are tied into either the
Power Distribution Panel, or Midnite E-Panel enclosure. This makes installation
a snap and drastically reduces the amount of wiring needed to bring power to
This system is designed to provide you with all the pieces that you will need
to get going with your own renewable energy systems.