Xantrex Battery Temperature Sensor is designed for use with DR and UX Inverters and C-Series Charge Controllers. The BTS is standard on SW and PS Inverters.
The BTS mounts on a terminal post of a battery in a bank or on the side of a battery and measures its temperature. It sends precise information to the charger or charge controller, which automatically adjusts voltage to ensure full battery charge, depending on the ambient temperature of your battery installation.
Xantrex Battery Temperature Sensor is designed for use with DR and UX Inverters and C Series Charge Controllers. The BTS is standard on SW and PS Inverters.
This product comes in a powder-coated metal enclosure designed to give your installation a truly professional look and feel. The large DC breaker is available as a separate ...
Product Features
Designed for use with PS Inverters and the SW Plus Inverter/Chargers, the Generator Start Module (GSM) is used to control an external automatic start generator.
It is used to start or stop a generator when the batteries can’t support the power loads because they are out of range or the load exceeds a pre-set current level.
It can also be used to start and stop the generator at regular intervals.
The package includes the adapter, DOS based software, 25' (7.6 m) of cable and a DB9 connector. Connection to the SWCA can be via 4 conductor phone-type cable or with standard PC modems over telephone line.
They are required for installations that must pass electrical inspection.
The SWI is only available for use with North American SW and PS inverters.
Additional circuit breakers may be added to the ACCB.
Knockouts are provided for 1/2", 3/4" and 2" sizes. With 175 amp Breaker.
Knockouts are provided for 1/2", 3/4" and 2" sizes. With 250 amp Breaker.
The combined panel is designed to accommodate the following components: one or two Sine Wave Plus Inverters, or one Sine Wave Plus Inverter and a TX Autotransformer plus: one AC Conduit Box-Long (ACCB-L), and one or two DC Conduit Box-Long (DCCB-L). Two DCCB-L's requires the XBP-DC.
(800) 265-8898
